A Google user
★★★
"If using an external GPS via WiFi this app will not recognize or connect. External GPS/GGNS such as Stratux will not work with this."
A Google user
★
"Will this app ever be able to work with an R8 receiver?"
Version: 2.0.11.20
A Google user
★★★★★
"Good to see Trimble Apps as sweet as this one."
Version: 1.0.6.7628
A Google user
★
"Look at the ``What`s new``: Now requires a separate update of GNSS Direct. When starting the GNSS Status app today it notified me that this GNSS Direct was required to run GNSS Status. Really? So now I have two extra apps that are sucking battery just so I can use Terraflex. Now I get a whopping 4 hours of survey time when I used to go 10-14 hours. (I use a GS6 in airplane mode with all other apps stopped). These two apps account for the majority of my battery drainage while my partner with an iPhone 7+ does not need these apps and ended the day with over 45% battery remaining (after my phone died). What is going on Trimble? This is the 2nd time your ``updates`` have crippled my work flow. edit for Trimble response: I use an Android. I have been told for the last year that Android`s require GNSS Status to hold the mock-location values because Terraflex can`t do it."
Version: 3.0.1.359
A Google user
★★★
"Why is this the only app that connects to the r1 receiver?.. The accuracy with SBAS is adequate but I need decimal degrees & waypoints."
Version: 1.0.6.7628
A Google user
★★★★★
"Works great on Galaxy S3 and Dell Venue 8 tablet"
Version: 1.0.6.4437
A Google user
★★★★
"Hhmmmm. Not sure how I feel about it."
A Google user
★★★
"GNSS Status app keeps losing bluetooth when I open the Collector for ArcGIS app. I have no clue why, but the R2 I`ve been using is working fine"
Version: 3.0.8.674
A Google user
★★
"We are using the latest version of the GNSS Status app (3.0.2) with a Trimble R2 receiver, KeyNet real-time correction service, and ArcCollector for field asset collection. The app used to work well, but ever since the redesign at 3.0 it is extremely unreliable. The app no longer remembers the connection to the receiver or the correction service automatically. We have to manually reestablish these at the beginning of every collection session, sometimes multiple times during the session. This greatly reduces efficiency. And once connected, it now takes much longer to achieve *and maintain* the ~2 inch accuracy we used to get routinely (accounting for weather and other physical factors). Does Trimble plan to address these serious bugs in the near term? To reiterate, the 2.x version of the GNSS Status app gave us no problems."
A F
★
"Possible malware. Doesn`t disclose that it requires other components to work and then tries to push you into downloading them."
Version: 3.0.9.683
A Google user
★★★
"When I start my phone up, my location accuracy is around 15 ft. Connect to my R2, down to 3 ft, great. However, every time I disconnect from the R2, my phone location accuracy shoots up to a minimum of 100 ft accuracy, sometimes up to 1.5 miles, and it is very slow to refresh. I can`t use my navigation with that accuracy, and the only fix is to reboot the whole phone, which then brings it back down to 15 ft accuracy so I know it`s not just where I am. Please resolve this issue, I am on a Samsung Galaxy S7 if that helps. Also I agree with the other users that having to install GNSS Direct as a separate app now is annoying and battery-draining."
A Google user
★★★★★
"Easy to use and reliable. Just what you want in an app!"
A Google user
★★
"Any time I type Status it crush down and disconnect my Trimble R1. Before this crushing I noticed, it shows altitude rounded to kilometers being more then 1000m asl. (For example altitude 2.6 km), the release notes thus are not true, this app is wrong way, better to use previous version, could you put it back for download?"
Version: 3.0.1.359
A Google user
★★
"App stopped working with Survey123. ESRI support comfirmed that other external receivers except Trimble devices work."
Version: 3.0.1.359