Zack Herr
★★★
"Glad to hear the next release will include more bearing data. I hope this will include bearing frequencies. Some feedback re: SKF`s Bearing Select program: Bearing Select gives bearing frequencies in whole Hz numbers. Multipliers are almost never even numbers and in my experience they`re always given with multiple (often 2-3) decimal places, i.e. FTF 0.424, BSF 3.183, BPOR 7.635, BPIR 10.365, etc. Using these multipliers for vibration analysis for example, FTF frequency for motor bearing at 1785 RPM would be 757 cycles/MIN (1785*0.424) aka 12.6 Hz. If you round up and only give the whole number (i.e. 13 Hz), that gives a cycles/min value of 780...a difference of about 23 cycles/min. (780-757) Doesn`t sound like much, but if there`s a lot of activity in the frequency spectrum it`s nice to have a margin of error better than 30 cycles/min. Don`t understand why SKF wouldn`t offer at least one decimal place to reduce that margin by a factor of ten."
Version: 1.0.5
Nallasellan R
★★★★★
"Useful engineering tool"
Version: 1.2.4
Saman Khosravi
★
"Hi! The app will not correctly load. ``Log in failed`` message appeared."
joseph dos
★★★★
"How to convert dimensions from inch to mm"
Version: 1.1.2
omukule emmanuel
★
"Am still experiencing"
RF Chitian
★
"Why there is no calculate data? While All calculation data ( like dynamic load rating...) available in your website"
Version: 1.0.5
Mohd Azmi
★★★★★
"Good for implementation of machine"
Version: 1.1.2
SAI PRASAD VAKALAPUDI
★★
"Finding measurements are in inches. I can use only in millimeters. How can i change from inches to millimeters"
Version: 1.2.2
Fotis Drolias
★
"You messed up the last update. Roll it back and start over"
Version: 1.2.1
Clay
★
"Asks for an account which is bs and then can`t find my bearing. At all. P2B 207-SRB-SRE is an skf bearing. This app is trash. Thanks for nothing."
Version: 1.2.4
Muhammad Faheem
★★★★★
"Good app used 1st time good experience"
Version: 1.1.3
Phil Grayden
★
"The book dosnt have login issues"
Version: 1.1.3
SURAJ kumar
★
"This app no have too much data for the customer."
Behnam Ameri
★
"Hi,I have created a username and a password and I have sent my gmail.You sent me a verification code and it was approved. But when I want to log in it says that the username is wrong. I use the same gmail and password.What is the problem? Thanks."
Version: 1.1.0
Kenny Francis
★★★★★
"Needed it, used it, it works, we`re back up and running nuff sed"
Version: 1.0.5
الرجل الحرفي
★★★★★
"Nice update now i can use this in metric system 👍"
Version: 1.2.0
naval bhoir
★★★
"Why it shows all values in inches? How to change units to metric?"
Thomas Gibson
★
"Put dimensions in and can`t find it 6205 bearing search separately comes up"
Version: 1.2.2
Barend Scheepers
★
"Since the last 2 updates,,I can not use or ``log in`` to the app,,any reasons why???"
Version: 1.1.3
Paymaan Jafari
★★★★
"It`s not metric, if you want to use the app without logging."
Version: 1.1.3